Free Microsoldering Forum – Ask an Expert
Ipad Air 2 A1566 No display issue
I got this Ipad air 2 without display while its on , when i took some measurements at the lcd connector pin , i found all the data lines coming from the cpu are OL , So I went ahead and check the filters and i found some filter capacitors on one side has voltages which is the side connected to the CPU but the otherside going thru the inductance before reach the lcd connector is OL , now my question is i do not have those filter capacitors to replace , is it safe to remove those filter capacitors and run a short jumper?
I don't think it's ever a good idea to run jumpers in place of filters, but if you are doing this for data recovery, then it should work. I'm not 100% sure that it'll work, but I think it should.
I realized that its not safe removing the filtering caps , so and i compare values with another ipad air 2 and its normal i am trying to get a known good original screen to test it out .