Free Microsoldering Forum – Ask an Expert
iphone 6 Plus
I often work on ip6s phones, but got a one off iphone 6 for repair. If I unplug the battery and power via dock with 5v DCPS, should I expect to see the same cyclic 70-120-200 ma boot loop with display logo like ip6s does? Should I expect to see the same steady 3.7v on the battery connector with the battery unplugged like ip6s does?
Right now the phone boots with apple logo, then a few seconds later gets stuck with a very dark gray blank screen, and a steady 120ma. Battery connector has pulsing 3.7v. Tristar and tigris have been replaced already, and don't see any obvious shorts under thermal cam.