Free Microsoldering Forum – Ask an Expert
Iphone 6s Error 4014
i have an iphone 6s that i want to upgrade its memory size. But after removing the nand on the iphone and replacing it with a larger nand, I got error 4014 in itunes. I have checked all the lines that involve nand but nothing short. Then try with 2 other nand I have taken from scrap board still get the same 4014 error.
I've tried to erase that nand and build a partition , rewrite all the nand information many times using ipbox but all fail. Did I damaged the other components on the board or those three nand that could not be used?
Well, I don't think error 4014 is always the nand. To isolate the issue, I think most people remove the nand, then try to do an update. If you get error 40, then the problem is most likely the nand. If you get another error, then the problem is not the nand. I would start with that.